{"product_id":"skystars-f7-hd-pro-ko45a-flight-stack","title":"SkyStars F7 HD Pro + KO45A Flight Stack","description":"\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cdiv\u003e\n 1. Solder pads are the largest in size compared to other FC in market.\n\u003c\/div\u003e\n\u003cdiv\u003e\n 2. Proper solder pad spacing to avoid solder bridge and facilitate easy soldering.\n\u003c\/div\u003e\n\u003cdiv\u003e\n 3. ESC connector on top-side rather than bottom which makes it easy for repair.\n\u003c\/div\u003e\n\u003cdiv\u003e\n 4. Support ELRS receiver row pin straight mounting.\n\u003c\/div\u003e\n\u003cdiv\u003e\n 5. TVS Diode for Reverse Polarity Protection and Voltage Spike Suppression.\n\u003c\/div\u003e\n\u003cdiv\u003e\n 6. Powerful BEC to supply all your electronics.\n\u003c\/div\u003e\n\u003cdiv\u003e\n 7. Pads arrangement are executed in such a way that when you twist the wires of the camera VTX and RX you don't get any wire overlapping this gives you a uniform twist and clean look.\n\u003c\/div\u003e\n\u003cdiv\u003e\n 8. DJI connector on the top side.\n\u003c\/div\u003e\n\u003cdiv\u003e\n 9. Budget-friendly price ( We understand the situation of chip shortage and rising prices of FC )\n\u003c\/div\u003e\n\u003cdiv\u003e\n 10. Two stages of Quality check to reduce any faulty electronic.\n\u003c\/div\u003e\n\u003cdiv\u003e\n 11. No power lines near Gyro to avoid any EMI interference.\n\u003c\/div\u003e\n\u003cdiv\u003e\n 12. Comes ready with I2C support and INAV.\n\u003c\/div\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Flight Controller\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   MCU: STM32F722RGT6 216MHz\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   Gyroscope: BMI270\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   Baro:Bmp280\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   OSD: Betaflight SPI OSD  DJI HD OSD(UART6)\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   Black box: 16MB\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   6x Uarts: UART 1\/2\/3\/4\/5\/6\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   4x PWM outputs\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   1x I2C\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   USB Type-C(USB2.0)\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   1x JST-SH1.0_8pin connector (Gnd\/Vbat\/S1\/S2\/S3\/S4\/Rx3\/Curr)\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   1x JST-SH1.0_6pin connector (R1\/G\/R6\/T6\/G\/10V)\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   VTX 10V\/Vbat filtered power ON\/OFF switch\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   DJI FPV OSD is supported by any spare UART\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   LED: 4 LED independent pads, support WS2812 programming lamp output.\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can be installed in any spare UART.\n  \u003c\/div\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n \u003cstrong\u003e\n  Power\n \u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Input voltage: 3-6S\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC: 5V\/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI\n \u003c\/li\u003e\n \u003cli\u003e\n  LDO 3.3V: Max.250mA\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n \u003cstrong\u003e\n  FC Firmware\n \u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n \u003cli\u003e\n  BetaFlight firmware: SKYSTARSF722Pro\n \u003c\/li\u003e\n \u003cli\u003e\n  INAV firmware: SKYSTARSF722HD\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n \u003cstrong\u003e\n  Mounting\n \u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation\n \u003c\/li\u003e\n \u003cli\u003e\n  External size 39mm × 39mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Flight control weight: 6.9g\n \u003c\/li\u003e\n \u003cli\u003e\n  Flight control onboard voltage sensor.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n \u003cstrong\u003e\n  BL32-45A4IN1 3-6S ESC BLheli32 128K DShot1200 4-in-1 ESC\n \u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Support 128K Dshot1200, Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signal\n \u003c\/li\u003e\n \u003cli\u003e\n  Power supply voltage: 3-6S (12-26V)\n \u003c\/li\u003e\n \u003cli\u003e\n  Continuous working current: 45A 60A\n \u003c\/li\u003e\n \u003cli\u003e\n  No built-in 5V BEC output\n \u003c\/li\u003e\n \u003cli\u003e\n  Firmware: BLHELI 32 ESC\n \u003c\/li\u003e\n \u003cli\u003e\n  Screw hole spacing: 30.5*30.5MM\n \u003c\/li\u003e\n \u003cli\u003e\n  Aperture: 4MM\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 14.6g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n - The ESC has an on-board filter capacitor that suppresses the back electromotive force, stabilizes the battery voltage, and protects the flight control ESC precision components.\n\u003c\/div\u003e\n\u003cdiv\u003e\n - EMI Shell provides stronger anti-interference capability.\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n Note: There is no difference in appearance between the 45A and 60A ESCs, which can be distinguished from the MOS tube.\n\u003c\/div\u003e\n\u003ch2\u003e\n Includes\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   1x F7HD Pro3 FC\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   1x KO45 or KO60 128K BL32 4IN1 ESC\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   8x Silicon grommets M4 to M3\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   2x JST-SH1.0_8pin cable, 4cm\n  \u003c\/div\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cdiv\u003e\n   1x JST-GH-6P cable for DJI port, 10cm\n  \u003c\/div\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/skystars_20f7_20pro_20stack_20info.jpg?v=1754258283\"\u003e\n\u003c\/p\u003e\n","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":64757172633949,"sku":"SKY-150723","price":70.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1073\/7254\/4349\/files\/Sky-F7-Pro-45A-Stack.jpg?v=1779363535","url":"https:\/\/buildlabfpv.com\/products\/skystars-f7-hd-pro-ko45a-flight-stack","provider":"BuildLab FPV","version":"1.0","type":"link"}